Whether you’re a professional
tiler, or a keen D.I.Y. enthusiast, just follow the instructions and
images below to see, how good a tool, the bathprotector™ really is.
Ensure all bath surfaces are
clean and free from dust and grime.
Half fill the bath
with water
with water
Remove the Bathprotector™ from
it's packaging and open it fully by unfolding.
Drape the bathprotector™ in
the bath, ensuring the excess end is covering the taps.
Using the enclosed tape, start
to seal the bathprotector™ to the top of the bath making sure the tape
goes up to the outside edge.
Any rubbish in the bathroom
can be carefully put in the bathprotector™ when finished tiling/decorating
and by peeling the bathprotector™ from each end, working into the
middle, lift the bathprotector™ out like a refuse sack.
Dispose of the bathprotector™ in a skip or other recepticle.
Note: If during use the bathprotector™ is punctured, quickly clean around the puncture, dry the area and seal the bathprotector™ with the excess tape left over from installation.
Disclaimer: Please ensure when using the bathprotector™ that children and animals are kept at a safe distance. The bathprotector™ is a plastic product which carries the risk of suffocation if misused.
Dispose of the bathprotector™ in a skip or other recepticle.
Note: If during use the bathprotector™ is punctured, quickly clean around the puncture, dry the area and seal the bathprotector™ with the excess tape left over from installation.
Disclaimer: Please ensure when using the bathprotector™ that children and animals are kept at a safe distance. The bathprotector™ is a plastic product which carries the risk of suffocation if misused.